Maintenance of chain block
Release time：
2022-05-27
1. Before use, all friction parts shall be filled with lubricating oil, and sediment shall be removed from the steel wire rope regularly.
1. Before use, all friction parts shall be filled with lubricating oil, and sediment shall be removed from the steel wire rope regularly.
2. After use, the dirt shall be removed to ensure the flexible movement of the parts, and the parts shall be disassembled regularly to check the wear of the parts. If the parts are seriously worn, they shall be replaced.
3. Disassembly steps: remove the forward handle, loosen the handle and dust cover, unscrew the bolts at the hook wing, the screws at the bottom of the shell, unscrew the screws fixed at the guide rope hole, open the shell, remove the large and small pull rods, and disassemble the machine body. During disassembly, observe the assembly position of parts, especially the assembly position of palate plate and size control plate.
4. After disassembly, cleaning and inspection, the machine body must be installed in place, and can be used again only after it is confirmed to be normal through test.
Previous
Previous
Advantages of handling small tanks
2022-05-27
Main Products:Permanent magnetic chuck,Sling,Carrying small tanks,Fall arrester,Monorail
Hebei Tianya Hoisting Machinery Co., Ltd.
Tel:+86 18633637919
E-mail: tianya@tianyacrane.com
Address: Donglv Village, Donglv Township, Baoding, Hebei, China
Copyright © 2022 Hebei Tianya Hoisting Machinery Co., Ltd.
www.300.cn | SEO Tag